Distimatic Industrial including automatic drainage of residue and adaptor piece for glassware set R
Automatic Module - Distimatic
Distimatic Industrial including automatic drainage of residue and adaptor piece for glassware set R
P/N: 036064700
The automatic module Hei-VOLUME Distimatic is compatible with all large-scale evaporators from Heidolph and comes with:
(picture similar)
- One adaptor piece for glassware set R
- One valve matrix
For distillation select between these two modes:
Sensor-Mode:
Refill and drainage are automatically sensor-controlled
- A sensor detects the fill-level inside the evaporation flask
- The desired/requested fill-level can be set individually
- Flask refill is achieved via valve control and under system pressure
- A sensor monitors the quantity of the solvent mixture and powers off the unit once it is completely processed
Time-Mode:
All parameters controlled by individually pre-programmed automatic time intervals
- The desired/requested fill-level can be set individually
- Flask refill is achieved via valve control and under system pressure according to pre-programmed cycles
- The process is powered off once the pre-programmed number of cycles have expired
Functional Principle
Save time by distilling large volumes in a continuous and unattended manner overnight and during the weekend
For unattended and continuous use – including automatic drainage of residue
Automatic solvent supply of the evaporating flask
Refilling with the Sensor-Mode runs automatically and is based on the desired level in the evaporation flask
Refilling with the Time-Mode is done according to individual time parameters
Automatic discharge of condensate
A valve matrix controls the continuous discharge of the condensate from the system into a temporary storage flask. Afterwards the collected condensate will be discharged into the collecting tank by a diaphragm pump
Automatic drainage of residue
The residue in the evaporating flask will be drained into a collecting tank. Afterwards the process starts again automatically by refilling the evaporating flask
End of distillation process
The process can be terminated automatically after evaporation is completed or manually at any time by the operator
Distimatic Industrial - Product Advantages
The complete system is sensor controlled and turns off the automatic module as well as all connected equipment completely in case of an emergency
The system can be placed under a fume hood which ensures the highest safety level for the operator
An easily accessible emergency button allows you to stop the process immediately by the operator
Take advantage of the wide range of possibilities to adjust the settings according to your individual needs
The storage and product containers can be replaced at any time during the process
Integrated plug connectors enable you to connect and to control also peripheral equipment from a central point
Affordable alternative to common 50 or 100 liter evaporators
Reduce your investments by using your existing equipment - the automatic module is compatible to all rotary evaporators from Heidolph
Increase your efficiency - the fully automatic process avoids the need of visual control and gives you time to focus on other tasks
The unattended and continuous reconditioning of solvent avoids any bottlenecks of availability of solvents and reduce your investments in this way
Distimatic Industrial - Technical Data
| Compatibility | Hei-VAP Industrial and Laborota 20 series |
|---|---|
| Automatic refill of sample | ✔ |
| Automatic discharge of condensate | ✔ |
| Automatic drainage of residue | ✔ |
| Total power multiple socket | 3,500 W |
| Emergency-Stop button | ✔ |
| Condensate pump | Integrated diaphragm pump |
| Residue Pump | diaphragm pump |
| Protection class DIN EN 60529 - Automatic module | IP 54 |
| Protection class DIN EN 60529 - front side | IP 65 |